Silicone Hand Feel Oil / Silicone Soft-Touch Coating
FAQ & Solutions
Q1: Poor adhesion, easy to peel off
A: Clean surface oil/dust; use silicone primer; increase curing temp/time.
Q2: Sticky/tacky surface after curing
A: Extend curing time; raise temperature; reduce coating thickness.
Q3: Crack when stretched
A: Apply thinner coating; use high-elasticity feel oil; ensure full cure.
Q4: Orange peel / rough surface
A: Adjust spray pressure and distance; improve leveling; filter the oil.
Q5: Poor hand feel (not smooth/soft)
A: Use recommended mixing ratio; avoid over-dilution; full cure.
Q6: Pinholes or bubbles
A: Use defoamer; stir slowly; filter before use; improve spraying environment.
Q7: Scratches easily
A: Ensure full curing; add hardener correctly; use wear-resistant grade.
<<Next: Types of Silicone Conductive Ink
- Hi, Winstar Silicone company, we are interested in your product silicone color masterbatch, could you please offer some free samples to us？ Our company address: ***LA,USA
- Hello Winstar, our product is compression molding product,could you advise which peroxide curing agent to use ?
- Hi friend, we have some problem in silicone to PVC bonding, that bonding strength is not well at all, how to improve it please ?